Cisco 350 Series Administration Manual page 708

25
482
The following information is displayed for backbone devices:
Parameter Notes
Name
Product Name From the device description MIB.
This field only appears when the device
is a switch with partial or full SNA
capabilities.
Host Name String of maximum 58 characters
IP Address Displays the IP address used by SNA to
connect to the device. Additional
advertised existing addresses (IPv4 and
IPv6) can be seen by pressing the icon
next to the label.
MAC Address The base MAC address of the device
Description Editable field of up to 80 characters.
Saved on SNA storage.
SNA Support Possible values:
This parameter appears only for
switches.
The parameters below only appear when View all is clicked. This option is only
available if the device is a switch with partial or full SNA capabilities.
Existing A list of the VLANs created on the
VLANs device. Dashed lines are used to join
consecutive VLANs.
Active The version number of the active
Firmware firmware
Version
•
Full Support for SNA devices
•
Partial Support for managed
devices
•
No SNA support for unmanaged
devices
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Smart Network Application (SNA)
Right-Hand Information Panel
Example
SG500-52P - 52-Port
Gigabit PoE Stackable
Managed Switch
RND_1
192.168.1.55
923:a8bc::234
00:00:b0:83:1f:ac
1, 6, 13-19, 1054, 2012-
2100, 4094
2.2.0.53