Cisco 350 Series Administration Manual page 471

17
STEP 5
STEP 1
STEP 2
STEP 3
328
• Secret Key—Address of switch containing RADIUS client.
- Use default key—For specified servers, the device attempts to authenticate the
RADIUS client by using the existing, default Key String.
- Encrypted—To encrypt communications by using MD5, enter the key in encrypted
form.
- Plaintext—Enter the key string in plaintext mode.
Click Apply. The key for the device is updated in the Running Configuration file.
RADIUS Server Groups
To set up a group of users that will be using the device as its RADIUS server:
Click Security > RADIUS Server > RADIUS Server Groups.
Click Add and enter the following fields:
• Group Name—Enter a name for the group.
• Privilege Level—Enter the management access privilege level of the group.
• Time Range—Check to enable applying a time range to this group.
• Time Range Name—If Time Range is selected, select the time range to be used. Click
Edit to define a time range in the
Time Range was previously created.
• VLAN—Select the VLAN for the users:
- None—No VLAN ID is sent.
- VLAN ID—VLAN ID sent.
- VLAN Name—VLAN name sent
Click Apply. The RADIUS group definition is added to the Running Configuration file of the
device.
Time Range
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
section. This field is only displayed if a
Security
RADIUS