Cisco 350 Series Administration Manual page 39

General Information
Window Navigation
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Application Link
Name
About
Help
Management Buttons
The following table describes the commonly-used buttons that appear on various pages in the
system.
Button Name
Add
Apply
Cancel
Clear
Clear Filter
Description
Click to display the device name and device version number.
Click to display the online help.
The SYSLOG Alert Status icon appears when a SYSLOG message,
above the critical severity level, is logged. Click the icon to open
the RAM Memory page. After you access this page, the SYSLOG
Alert Status icon is no longer displayed. To display the page when
there is not an active SYSLOG message, Click Status and
Statistics > View Log > RAM Memory.
Description
Use the pull-down menu to configure the number of entries per
page.
Indicates a mandatory field.
Click to display the related Add page and add an entry to a table.
Enter the information and click Apply to save it to the Running
Configuration. Click Close to return to the main page. Click Save
to display the Copy/Save Configuration page and save the Running
Configuration to the Startup Configuration file type on the device.
Click to apply changes to the Running Configuration on the device.
If the device is rebooted, the Running Configuration is lost, unless
it is saved to the Startup Configuration file type or another file
type. Click Save to display the Copy/Save Configuration page and
save the Running Configuration to the Startup Configuration file
type on the device.
Click to reset changes made on the page.
Clear information on page.
Click to clear filter to select information displayed.
2
27