Cisco 350 Series Administration Manual page 710

25
484
The following information is displayed for offline backbone devices under Last Known
Information:
Parameter Name Notes
Product Name Taken from the device description
MIB.
This field only appears when the
device is a switch with partial or full
SNA capabilities.
Host Name String of up to 58 characters
IP Address Displays the last IP address used to
connect to the device when last seen.
MAC Address The base MAC address of the device
Description Editable field of a maximum of 80
characters.
Last seen The date and time the device was last
seen by SNA in the format of the active
language file.
The following information is displayed for a client (end point device, such as a PC):
Parameter Name Notes
Host Name String of a maximum of 58 characters
IP Address Shows the IP address used by SNA to
connect to the device. Additional
advertised addresses (IPv4 and IPv6)
can be seen by clicking an icon next to
the label.
MAC Address The base MAC address of the device
Device Type The type of client device
Connected The interface through which the
Interface device is reached on the closest switch
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Smart Network Application (SNA)
Right-Hand Information Panel
Example
SG500-52P - 52-Port Gigabit
PoE Stackable Managed
Switch
RND_1
192.168.1.55
00:00:b0:83:1f:ac
English language file
example:
2015-Nov-04 17:17:53
Example
RND_1
192.168.1.55
923:a8bc::234
00:00:b0:83:1f:ac
Phone
Host
Unknown
GE1/14