Cisco 350 Series Administration Manual page 609

Security: IPv6 First Hop Security
Configuring IPv6 First Hop Security through Web GUI
STEP 6
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
To attach this policy to an interface click Attach Policy to Interface, which takes you to the
Policy Attachment (Port)
Policy Attachment (VLAN)
To attach a policy to one or more VLANs:
Click Security > IPv6 First Hop Security > Policy Attachment (VLAN).
The list of policies that are already attached are displayed along with their Policy Type, Policy
Name and VLAN List.
To attach a policy to a VLAN, click Add and enter the following fields:
• Policy Type—Select the policy type to attach to the interface.
• Policy Name—Select the name of the policy to attach to the interface
• VLAN List—Select the VLANs to which the policy is attached.
Click Apply to add the settings to the Running Configuration file.
Policy Attachment (Port)
To attach a policy to one or more ports or LAGs:
Click Security > IPv6 First Hop Security > Policy Attachment (Port).
The list of policies that are already attached are displayed along with their Interface, Policy
Type, Policy Name and VLAN List.
To attach a policy to a port or LAG, click Add and enter the following fields:
• Interface—Select the interface on which the policy will be attached.
• Policy Type—Select the policy type to attach to the interface.
Overview.
• Policy Name—Select the name of the policy to attach to the interface
• VLAN List—Select the VLANs to which the policy is attached.
Click Apply to add the settings to the Running Configuration file.
page where you can attach this policy to a port.
26
IPv6 First Hop Security
468