Cisco 350 Series Administration Manual page 396

IP Configuration
IPv4 Management and Interfaces
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
- Client Identifier—Enter a unique identification of the client specified in
hexadecimal notation, such as: 01b60819681172.
or:
- MAC Address—Enter the MAC address of the client.
Enter either the Client Identifier or MAC Address, according to which type you
selected.
• Client Name—Enter the name of the static host, using a standard set of ASCII
characters. The client name must not include the domain name.
• Default Router IP Address (Option 3)— Enter the default router for the static host.
• Domain Name Server IP Address (Option 6)—Select one of the devices DNS servers
(if already configured) or select Other and enter the IP address of the DNS server
available to the DHCP client.
• Domain Name (Option 15)—Enter the domain name for the static host.
• NetBIOS WINS Server IP Address (Option 44)— Enter the NetBIOS WINS name
server available to the static host.
• NetBIOS Node Type (Option 46)—Select how to resolve the NetBIOS name. Valid
node types are:
- Hybrid—A hybrid combination of b-node and p-node is used. When configured to
use h-node, a computer always tries p-node first and uses b-node only if p-node
fails. This is the default.
- Mixed—A combination of b-node and p-node communications is used to register
and resolve NetBIOS names. M-node first uses b-node; then, if necessary, p-node.
M-node is typically not the best choice for larger networks because its preference
for b-node Broadcasts increases network traffic.
- Peer-to-Peer—Point-to-point communications with a NetBIOS name server are
used to register and resolve computer names to IP addresses.
- Broadcast—IP Broadcast messages are used to register and resolve NetBIOS names
to IP addresses.
• SNTP Server IP Address (Option 4)— Select one of the device's SNTP servers (if
already configured) or select Other and enter the IP address of the time server for the
DHCP client.
• File Server IP Address (siaddr)—Enter the IP address of the TFTP/SCP server from
which the configuration file is downloaded.
16
309