Cisco 350 Series Administration Manual page 40

2
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Button Name
Clear All Interfaces
Counters
Clear Interface
Counters
Clear Logs
Clear Table
Close
Copy Settings
Delete
Details
Edit
Go
Refresh
Test
Restore Defaults
Cancel Defaults
Description
Click to clear the statistic counters for all interfaces.
Click to clear the statistic counters for the selected interface.
Clears log files.
Clears table entries.
Returns to main page. If any changes were not applied to the
Running Configuration, a message appears.
A table typically contains one or more entries containing
configuration settings. Instead of modifying each entry
individually, it is possible to modify one entry and then copy the
selected entry to multiple entries, as described below:
1. Select the entry to be copied. Click Copy Settings to display the
popup.
2. Enter the destination entry numbers in the to field.
3. Click Apply to save the changes and click Close to return to the
main page.
After selecting an entry in the table, click Delete to remove.
Click to display the details associated with the entry selected.
Select the entry and click Edit. The Edit page appears, and the
entry can be modified.
1. Click Apply to save the changes to the Running Configuration.
2. Click Close to return to the main page.
Enter the query filtering criteria and click Go. The results are
displayed on the page.
Click Refresh to refresh the counter values.
Click Test to perform the related tests.
Click Restore Defaults to restore factory defaults.
Click Cancel Defaults to restore factory defaults.
General Information
Window Navigation
28