Identification - Cisco 350 Series Administration Manual

3

Identification

34
The following configuration options (right-hand corner) are available:
• Refresh Time—Select one of the options displayed.
• Multicast Groups—Click to open
• MAC Address Table—Click to open
• TCAM Utilization Information—Click to open
• CPU Utilization Information—Click to open
This module displays basic information regarding the device and stack, as shown below:
It displays the following fields:
• System Description—Displays description of the device.
• Host Name—Entered in the
added in the Getting Started
• Firmware Version—Current firmware version running on device.
• MAC Address (master unit)—MAC address of the unit.
• Serial Number (master unit)—Serial number of the unit.
• System Location—Enter the physical location of the device.
• System Contact—Enter the name of a contact person.
• Total Available Power—Amount of power available to the device.
MAC Group Address
Dynamic
System Settings
Wizard.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Addresses.
Hardware Resource
CPU Utilization.
page or default is used. Also can be
Dashboard
Identification
Utilization.