Port Management
Port Settings
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
•
Administrative Port Speed—Select the speed of the port. The port type determines the
available speeds. You can designate Administrative Speed only when port auto-
negotiation is disabled.
•
Operational Port Speed—Displays the current port speed that is the result of
negotiation.
•
Administrative Duplex Mode—(Only displayed on non-XG ports) Select the port
duplex mode. This field is configurable only when auto-negotiation is disabled, and the
port speed is set to 10M or 100M. At port speed of 1G, the mode is always full duplex.
The possible options are:
-
Half—The interface supports transmission between the device and the client in only
one direction at a time.
-
Full—The interface supports transmission between the device and the client in both
directions simultaneously.
•
Operational Duplex Mode—(Only displayed on non-XG ports) Displays the ports
current duplex mode.
•
Auto Advertisement—Select the capabilities advertised by auto-negotiation when it is
enabled.
Not all options are relevant for all devices.
NOTE
The options are:
-
Max Capability—All port speeds and duplex mode settings can be accepted.
-
10 Half—10 Mbps speed and Half Duplex mode (does not appear on XG devices)
-
10 Full—10 Mbps speed and Full Duplex mode (does not appear on XG devices)
-
100 Half—100 Mbps speed and Half Duplex mode (does not appear on XG devices)
-
100 Full—100 Mbps speed and Full Duplex mode.
-
1000 Full—1000 Mbps speed and Full Duplex mode.
-
2500 Full—The LAG advertises a 2500 Mbps speed and the mode is full duplex.
This is only supported on the 550 family.
-
5000 Full—The LAG advertises a 5000 Mbps speed and the mode is full duplex.
This is only supported on the 550 family.
-
10000 Full—The LAG advertises a 10000 Mbps speed and the mode is full duplex.
This is only supported on the 550 family.
10
163