Component Locations
lndex
Manual Steering
N O T E :
. lf an intact airbag assembly has been removed from a scrapped vehicle or has been found defective or damaged dur-
ing transit, storage or service, it should be deployed {see section 24)'
.
Before removing the gearbox, remove the driver's airbag assembly and steering wheel
. After installing the gearbox, check the wheel alignment and adjust if necessary.
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS
section {24} before performing repairs or service
STEERING WHEEL
Removal/lnstallaiion,
page 17-35
Disassembly/Reassembly,
page 17'36
DRIVER'S AIRBAG ASSEMBLY
Bemoval/lnstallation,
see section 24
STEEBING COLUMN
Removal/lnstallation,
Page 17 37
Inspection, page'17-38
CABLE REEL
Femoval/lnstallation,
see section 24
IGNITION SWITCH
See section 23
STEERING GEARBOX
Rack Guide Adjustment, Page 17-5
R e m o v a l , p a g e ' 1 7 - 5
Disassembly, page 17-7
Beassembly, page
'17 9
Installation, page 17 13
TIE.ROD ENO BALL JOINT
Ball Joint Boot Feplacement, page 17-68
17-3