ABS Control Unit
Pulsers/Wheel
Sensors
Replacement
Remove the right side kick panel.
Disconnect the ABS control unit connectors.
Remove the ABS control unit.
Install the ABS control unit in the reverse order of
removal.
1 .
2 .
3 .
4 .
CONNECTORS
19-64
Inspection
1. Check the front and rear pulser for chipped or dam-
aged teeth.
2.
Measure the air gap between the wheel sensor and
pulser all the way around whiie rotating the pulser.
Standard:0.4 - 1.0 mm (0.02 - 0,04 inl
N O T E : l f t h e g a p e x c e e d s 1 . 0 m m ( 0 . 0 4 i n ) , t h e
p r o b a b i l i t y i s a d i s t o r t e d s u s p e n s i o n a r m w h i c h
should be replaced.
Front
0.4 - 1.0 mm
{0.02 - 0.04 inl
0.4 - 1.0 mm
(0.02 - 0.04 in)