Hub Bearing Unit Replacement - Honda Civic 1998 Service Manual

Hub Bearing Unit Replacement
NOTE:
.
Use only genuine Honda wheel weights for aluminum wheels. Non-genuine wheel weights may corrode and damage
t h e a l u m i n u m w h e e l s .
. Onthe aluminum wheels, remove the center cap f rom the inside ofthewheel after removing thewheel.
.
Before installing the brake drum, clean the mating surfaces of the rear hub and the brake drum.
. Before installing the wheel, clean the mating surfaces of the brake drum and wheel.
TRAILING ARM
Check for cracking
ano oamage.
BNAKE SHOE
SPINOLE NUT
22 x 1.5 rnm
181 N.m 118.5 kgf.m, 134lbt.ft)
Replace.
NOTE: After tightening, use a drift
punch to lock the spindle nut shoulder
into the spindle.
SPINDLE WASHER
BACKING PLATE
FLANGE BOLT
1 0 x 1 . 2 5 m m
5,1 N.m (5.5 kgtm,,l0 lbtft)
REAR WHEEL
HUB BEABING UNIT
Check tor cracking
and oamage.
BRAKE DRUM
Check for wear
ano oamage.
WHEEL NUT
1 2 x 1 . 5 m m
108 N.m (11.0 kgf'm,80lbtft)
(cont'dl
18-21