CHAPTER 7 EXTERNALS AND CONTROLS
5.4.12 Motor Driver PCB
1) Remove the right rear lower cover/rear
lower cover, and detach the waste toner
bottle.
2) Remove the two screws [1], and detach
the PCB cover [2].
3) Remove the six screws [3], and discon-
nect the 11 connectors; detach the mo-
tor driver PCB [4].
5.4.13 Anti-Rush Current PCB
1) Remove the DC controller PCB.
2) Remove the screw [1], and disconnect
the three connectors [2]; then, detach
the anti-rush current PCB [3] from the
DC controller mounting base.
7-32 P
COPYRIGHT © 2001 CANON INC.
[1]
F07-504-21
[4]
F07-504-22
[1]
F07-504-23
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
[2]
[3]
[3]
[2]
[3]