Show Fcdroplatency - Cisco MDS 9124 - Fabric Switch Reference

show fcdroplatency

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fcdroplatency
To display the configured Fibre Channel latency parameters, use the show fcdroplatency command.
Syntax Description
network
switch
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the configured Fibre Channel latency parameters.
switch# show fcdroplatency
switch latency value:4000 milliseconds
network latency value:5000 milliseconds
Cisco MDS 9000 Family Command Reference
22-80
show fcdroplatency [network | switch]
Network latency in milliseconds.
Switch latency in milliseconds.
Modification
This command was introduced.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x