Updating The Driver Software; Viewing Or Changing The Properties Of The Controller - D-Link DGE-560SX User Manual

setup /s /v"/qn REINSTALL=ALL"
To perform a GUI reinstall of the same installer
Type the following:
setup /V"REINSTALL=ALL"
Using the Found New Hardware Wizard
These instructions apply to Windows Server 2003.
1. When Found New Hardware Wizard opens, click No, not this time, and then click
Next.
2. Click Install from a list or specific location (Advanced), and then click Next.
3. Click Include this location in the search, browse to the folder on the installation
CD where the drivers are located, and then click Next.
4. Click Finish to close the wizard.

3.7.2 Updating the Driver Software

To update the driver software
1. Start Windows and log on. You must have administrative privileges to update the
driver software.
2. In Control Panel, click System to view System Properties.
3. Click the Hardware tab, and then click Device Manager.
4. Right-click the name of the D-Link NetXtreme 5718 Gigabit Ethernet Controller and
click Update Driver.
5. Follow the on-screen instructions provided by the Hardware Update Wizard.
6. Click Include this location in the search, browse to the folder on the installation
CD where the drivers are located, and then click Next.
7. Click Finish to close the wizard.
3.7.3 Viewing or Changing the Properties of the
Controller
D-Link DGE-560SX User Guide
74