D-Link DGE-560SX User Manual page 65

Example:
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_EII VSLOT=1 NOSCREEN
GVRP
Enables GVRP (GARP VLAN Registration Protocol) for the VLAN that is loaded. An untagged
IEEE 802.2 frame type must be loaded in the virtual adapter and all bound physical adapters
for GVRP to take effect. This is necessary because GVRP uses untagged 802.2 frames to
advertise VLAN memberships. Use VLAN=0 FRAME=ETHERNET_802.2 in the load command
to specify untagged IEEE 802.2 frame type.
Example:
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V2_EII VSLOT=1 VLAN=2 GVRP
LOAD BASP.LAN FRAME=ETHERNET_802.2 NAME=BASP_1_E82 VSLOT=1 VLAN=0
Editing the Autoexec.ncf File
When an adapter configuration is saved, the NetWare install program adds load and bind
statements to the Autoexec.ncf file. By accessing this file, you can verify the parameters
configured for each adapter, add or delete parameters, or modify parameters.
A valid autoexec.ncf file is shown below with various VLAN and teaming examples.
Example:
# Team of 2 NIC adapters with frame type Ethernet_II and one VLAN, number
2
# Load BASP.LAN with the frame types and VLAN ID(s) specified.
LOAD ODINEB.NLM
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V2_EII VSLOT=1 VLAN=2
# Load the network drivers for the NIC adapters in the team with the same
# frames types.
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_2_EII SLOT=2
D-Link DGE-560SX User Guide
65