D-Link DGE-560SX User Manual page 97

3. Select the diagnostic tests you want to run. Click Select All to select all tests or
Clear All to clear all test selections.
4. Select the number of times to run the tests from Number of loops.
5. Click Run test(s).
6. In the error message window that warns of the network connection being temporarily
interrupted, click Yes. The results are displayed in the Result field for each test.
NOTES:
DGE-560SX supports fiber interface and so the information of MII Registers,
o
LoopBack MAC, and LoopBack PHY are not available.
The list of available properti
Control Registers
This test verifies the read and write capabilities of the network adapter registers by writing
various values to the registers and verifying the results. The adapter driver uses these
D-Link DGE-560SX User Guide
97