Note: The Create Team tab appears only if there are teamable adapters
available.
4. Click the Team Name field to enter a team name.
5. Click the Team Type field to select a team type.
6. Assign any available adapter or adapters to the team by selecting the adapter from
the Load Balance Members list. There must be at least one adapter selected in the
Load Balance Members list.
7. You can assign any other available adapter to be a standby member by selecting it
from the Standby Member list.
Note: There must be at least one Broadcom network adapter assigned to the
team.
The Large Send Offload (LSO), Checksum Offload (CO), and RSS indicate if the
LSO, CO, and/or RSS properties are supported for the team. The LSO, CO, and
RSS properties are enabled for a team only when all of the members support and
are configured for the feature.
D-Link DGE-560SX User Guide
118