D-Link DGE-560SX User Manual page 57

LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_EII VSLOT=1
2. Load the network drivers for the adapters that are to be on the team. The frame types
loaded should be the same for all adapters on the team and the same as those loaded
for BASP.LAN in step 1. Do not bind protocols directly to these adapters. Be sure to
load ODINEB.NLM (supplied by Novell) before all network drivers are loaded.
Example:
LOAD ODINEB.NLM
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_2_EII SLOT=2
After BASP.LAN is successfully loaded, a new screen similar to the one above appears. This
screen displays all virtual adapter settings and statistics. Press ALT+ESC to switch back to the
console and continue with step 3.
1. Bind BASP.LAN to the adapters on the team by using a custom BASP BIND command
at the console.
Example:
BASP BIND BASP_1_EII B57_1_EII
BASP BIND BASP_1_EII B57_2_EII
D-Link DGE-560SX User Guide
57