D-Link DGE-560SX User Manual page 62

1. Load the BASP.LAN driver with the all necessary frame types and specify the VLAN ID
for each frame type. You can specify a maximum of 64 VLAN IDs and each VLAN ID
can be loaded up to four times with four different frame types.
Example: (VLAN ID 2 for Ethernet II)
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V2_EII VSLOT=1 VLAN=2
NOTE: When adding 64 VLANs, the 64th VLAN must have a VLAN ID of 0 (63
VLANs are tagged and 1 VLAN is untagged)
2. Load the network drivers for the adapters on the team with all the frame types
specified in step 1. Note that the one or more VLAN IDs specified in step 1 do not have
to be specified when loading the network drivers. Each frame type loaded in step 1
needs to be loaded only once for each network driver, even if it is loaded multiple
times with different VLAN IDs in step 1. Only Broadcom and Alteon NIC adapters can
be used. The ALT.LAN driver must be version 2.05b or later (released by Broadcom)
and must include the keyword FORVLANS.
Example: (Broadcom adapters)
LOAD ODINEB.NLM
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_2_EII SLOT=2
Example: (Alteon adapters)
LOAD ODINEB.NLM
LOAD ALT.LAN FRAME=ETHERNET_II NAME=ALT_1_EII SLOT=1 FORVLANS
LOAD ALT.LAN FRAME=ETHERNET_II NAME=ALT_2_EII SLOT=2 FORVLANS
3. Bind BASP.LAN to the NIC adapters in the team for each protocol.
Example:
BASP BIND BASP_1_V2_EII B57_1_EII
BASP BIND BASP_1_V2_EII B57_2_EII
If there are multiple VLANs (each with one or more frame types) loaded on the
virtual adapter, it is only necessary to bind one frame type on one VLAN on the
D-Link DGE-560SX User Guide
62