D-Link DGE-560SX User Manual page 15

The BASP subagent allows an SNMP manager software to actively monitor the configurations
and performance of the Broadcom Advanced Server features. The subagent also provides an
alarm trap to an SNMP manager to inform the manager of any changes to the conditions of
the BASP component.
The BASP subagent allows monitoring of the configurations and statistics for the BASP teams,
the physical NIC adapters participating in a team, and the virtual NIC adapters created as the
result of teaming. Non-teamed NIC adapters are not monitored at this time. The BASP
configuration data includes information such as team IDs, physical/virtual/VLAN/team
adapter IDs, physical/virtual/VLAN/team/ adapter descriptions, and MAC addresses of the
adapters.
The statistics include detailed information such as data packets transmitted and received for
the physical/virtual/VLAN/team adapters.
The alarm trap forwards information about the changes in configuration of the physical
adapters participating in a team, such as physical adapter link up/down, and adapter
installed/removed events.
To monitor this information, an SNMP manager must load the Broadcom BASP MIB database
files to allow monitoring of the information described above. These files, which are shown
below, are included with the installation CD:
baspcfg.mib
baspstat.mib
basptrap.mib
BASP Extensible-Agent
The D-Link NetXtreme Gigabit Ethernet Controller Extended Information SNMP
extensible-agent, bcmif.dll, is designed for Windows Server 2003, and Windows Server 2008
SNMP service.
The extensible-agent allows the SNMP manager software to actively monitor the
configurations of the D-Link NetXtreme adapter. It is intended to supplement the information
already provided by the standard SNMP Management Network Interface information.
D-Link DGE-560SX User Guide
15