3. Type the team name and then click Next. If you want to review or change any of your
settings, click Back. Click Cancel to discard your settings and exit the wizard.
Note: The team name cannot exceed 39 characters, cannot begin with spaces, and
cannot contain any of the following characters: & \ / : * ? < > |
4. Select the type of team you want to create. If the team type is an SLB type team, click
Next. If the team type is not an SLB type team, then a dialog box appears. Verify that
the network switch connected to the team members is configured correctly for the
team type, click OK, and continue.
D-Link DGE-560SX User Guide
108