D-Link DGE-560SX User Manual page 93

D-Link DGE-560SX User Guide
Bus Width (bit)
The number of bits that the bus can transfer at a single time to and from the adapter. This
item is not available for PCI Express type adapters.
Bus No
Indicates the number of the bus where the adapter is installed.
Device No
The number assigned to the adapter by the operating system.
Function No
The port number of the adapter. For a single-port adapter, the function number is 0. For a
two-port adapter, the function number for the first port is 0, and the function number for the
second port is 1.
Interrupt Request
The interrupt line number that is associated with the adapter. Valid numbers range from 2 to
25.
Memory Address
The memory mapped address that is assigned to the adapter. This value can never be 0.
Viewing Hardware Information
The Hardware section of the Information tab displays information about the hardware
settings for the selected network adapter.
To view Hardware for any installed network adapter, click the name of the adapter listed in
the Explorer View pane, then click the Information tab.
Note: Some information may not be available for all Broadcom network adapters.
93