D-Link DGE-560SX User Manual page 146

2. Place the Broadcom driver files in the i386 subfolder under the original image folder.
Example: i:\RemoteInstall\Setup\English\Images\(Original Image)\i386
3. Place the Broadcom driver files for the network adapter in the RIPREP Image folder.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)
4. Place the Broadcom adapter drivers in the i386 subfolder where the RIPREP Image is
located.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)\i386
The Microsoft Knowledge base articles listed below were used as a reference for the following
instructions:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;254078
http://support.microsoft.com/default.aspx?scid=kb;EN-US;246184
1. Create the following path and place all Broadcom driver files in ..\(RIPREP
Image)\$oem$\$1\Drivers.
2. Edit the riprep.sif file located in ..\(RIPREP Image)\i386\Template to include the
following information under the [Unattend] section:
OemPreinstall = yes
OemPnPDriversPath = "Drivers
DriverSigningPolicy = Ignore
3. Create the following path and place all Broadcom driver files in ..\(Original
Image)\$oem$\$1\Drivers.
4. Edit the ristndrd.sif file located in ..\(Original Image)\i386 \templates to include the
following information under the [Unattend] section:
OemPreinstall = yes
OemPnPDriversPath = "Drivers
DriverSigningPolicy = Ignore
D-Link DGE-560SX User Guide
146