D-Link DGE-560SX User Manual page 66

D-Link DGE-560SX User Guide
# Bind BASP.LAN to the NIC adapters in the team for each protocol.
BASP BIND BASP_1_V2_EII B57_1_EII
BASP BIND BASP_1_V2_EII B57_2_EII
#Bind protocols to BASP.LAN.
BIND IP BASP_1_V2_EII ADDR=192.168.2.200 MASK=255.255.255.0
Example:
# Team of 2 NIC adapters with frame type Ethernet_II and three VLANs,
number 2,3,4
#Load BASP.LAN with the frame types and VLAN ID(s) specified.
LOAD ODINEB.NLM
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V2_EII VSLOT=1 VLAN=2
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V3_EII VSLOT=1 VLAN=3
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_V4_EII VSLOT=1 VLAN=4
# Load the network drivers for the NIC adapters in the team with the same
# frame types and VLANs specified.
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_1_EII SLOT=1
LOAD B57.LAN FRAME=ETHERNET_II NAME=B57_2_EII SLOT=2
# Bind BASP.LAN to the NIC adapters in the team for each protocol
# NOTE: BASP BIND is only used for the first VLAN all other VLANs are
automatically
# bound to the virtual adapter (VSLOT=1).
BASP BIND BASP_1_V2_EII B57_1_EII
BASP BIND BASP_1_V2_EII B57_2_EII
# Bind protocols to BASP.LAN.
66