5. Select the features you want installed. If you receive a warning regarding .NET
Framework 2.0, then press OK to continue installing BACS and manually install .NET
Framework 2.0 when installation completes, or Cancel to quit.
6. Click Next.
7. Click Install.
8. Click Finish to close the wizard.
4.1.2 Using Silent Installation
NOTES:
All commands are case sensitive.
o
User must "Run as Administrator" for Vista when using "msiexec" for "silent"
o
install/uninstall(s).
For detailed instructions and information about unattended installs, refer to
o
the Silent.txt file in the MgmtApps folder.
To perform a silent install (or upgrade) from within the installer source folder
Type the following:
setup /s /v/qn
If performing a silent upgrade, your system may reboot automatically. To suppress the
reboot, type the following:
setup /s /v"/qn REBOOT=ReallySuppress"
To perform a silent install and create a log file
Type the following:
setup /s /v"/qn /L f:\ia32\1testlog.txt"
The 1testlog.txt log file will be created at f:\ia32.
To perform a silent uninstall from any folder on the hard drive
msiexec /x "{26E1BFB0-E87E-4696-9F89-B467F01F81E5}" /qn
D-Link DGE-560SX User Guide
78