Out Of The Box; Initial Setup For Thor Vm3; Hardware Setup; Software - Honeywell Thor vm3 User Manual

Out of the Box

The following items may be packaged separately:
• Thor VM3
• Standard or Enhanced Dock (includes 10-60VDC power cable)
• RAM or U-Bracket vehicle mount kit
If you ordered additional accessories for the Thor VM3, verify they are also included with the order. Keep the original packaging
material in the event the Thor VM3 should need to be returned for service. For details, see
10-1).

Initial Setup for Thor VM3

This page lists a quick outline of the steps you might take when setting up a new Thor VM3. More instruction for each step is
listed later in this guide.
Contact Technical Assistance

Hardware Setup

1. Install RAM Mount
2. Place Thor VM3 in the Dock
3. Secure the optional external keyboard to either an integrated or remote mounting bracket.
4. Connect Cables (page 4-16) for any peripherals.
5. Connect Power (page 4-17).
6. Secure all cables in
7. Press the Power Switch
8. Press the Power Button
9. Perform touch screen

Software

Languages
The Thor VM3 is shipped with a multi-language operating system. To change the language displayed, go to the User
Interface Language tab of the
pull-down list. After selecting the desired language a reboot may be necessary. Use the Restart option on the
Registry (page 5-55) control panel to reboot.
First Boot
When a new Thor VM3 starts up a EULA (End User License Agreement) may be displayed on the touch screen. It
remains on the screen until the Accept or Decline button is tapped with a stylus.
Tap the Accept button to accept the EULA terms and the Thor VM3 continues the startup process. The EULA is not
presented to the user again.
Tap the Decline button to decline the EULA and the Thor VM3 reboots. It will continue to reboot until the Accept but-
ton is tapped with the stylus.
Software Setup
Hardware setup should be completed before starting software setup.
2 - 2
(page 10-1) if you need additional help.
(page 4-4) or Install U Bracket Mount
(page 4-2).
Strain Relief Cable Clamps
(page 3-4) on the dock to the on position.
(page 3-4) on the Thor VM3.
Calibration (page 5-59).
Regional Settings
(page 4-13) to the vehicle.
(page 4-16).
(page 5-54) control panel. Available languages are displayed in a
Product Service and Repair (page