Honeywell Thor vm3 User Manual page 119

Using Quick Connect with On Screen Bar Code
1. Select Bluetooth Scanning from the Control Panel (either large or small icon view option must be selected).
2. Tap Add Device.
3. Select Quick Connect.
4. Tap Next.
5. Select the type of scanner to add:
Note: The bar codes below are samples. Do not scan these to connect a Bluetooth scanner. Scan the bar
code on your device
Note: If this choice is not presented, the on-screen bar code displayed is only valid for SF51, SF61 or SR61
bar code scanners.
Select Granit 2D scanner to display this bar code
Scan the displayed bar code to connect one of
these scanners:
• Honeywell/LXE 8650 family of Bluetooth ring
scanners
• Honeywell Granit 1911i Bluetooth scanner
• Honeywell Granit 1981i Bluetooth scanner
• LXE 88x0 family of Bluetooth scanners
Note: Not all bar code scanners can read the bar code from the screen. If this process fails, use the printed
label on the device. See
Search
To search for a Bluetooth scanner:
1. Select Bluetooth Scanning from the Control Panel (either large or small icon view option must be selected).
2. Tap Add Device.
3. Select Search.
4. Tap Next.
5. Select the scanner from the devices shown.
6. Tap Next.
Using Quick Connect with On Screen Bar Code
Select SF51, SF61 or SR61 scanner to display
this bar code
Scan the displayed bar code to connect one of
these scanners:
• Intermec SF51 Bluetooth scanner
• Intermec SF61 Bluetooth scanner
• Intermec SR61 Bluetooth scanner
(page 5-21)
5 - 21