Honeywell Thor vm3 User Manual page 56

Step 8 - Attach Scanner Holder (Optional)
This step is only for use with the Enhanced Dock.
1. Attach the accessory RAM ball to the Enhanced Dock. There are two mounting provisions, one on either side of
the Enhanced dock and either can be used to mount the scanner holder.
Note: Some components eliminated for detail clarity.
2. Attach the RAM ball to the back of the scanner holder.
3. Slip the RAM arm over the accessory RAM ball.
4. Slip the RAM ball on the scanner holder into the RAM arm.
5. Tighten the knob on the RAM arm while adjusting to the desired angle.
4 - 12