Tasks; Status; Profile List - Honeywell Thor vm3 User Manual

Tasks

Tasks are listed on the left side of the screen:
• Browse Nearby Wireless Networks
• Roam Management
• Admin Login (page 7-3)

Status

The status of the radio card is shown in the upper right hand of the screen:
Radio is on.
Tapping the button turns the radio off.
Radio is off.
Tapping the button turns the radio on.
Note: The radio status can only be changed when the admin is logged on. Tapping the icon has no effect when not logged
in.
The status of the network connection is above the profile list.

Profile List

All profiles that have been created are listed in this section. Profiles can be configured for auto connect or manual connect
and are subdivided by connection type in this list.
From the profile list, an admin can:
• Organize - Open or rename a profile
• New - Create a new profile
• Delete - Delete an existing profile
• Activate - Make an inactive profile the active profile. The inactive profile may be either a manual or an auto profile not
currently in use.
• Deactivate - When the current active profile is selected, this option deactivates that profile. If there is an inactive auto
profile, that profile may become active.
• Up - If there are multiple profiles, the Up feature moves the selected profile up the list. This feature is available for both
the Auto and Manual profiles.
• Down - If there are multiple profiles, the Down feature moves the selected profile down the list. This feature is available
for both the Auto and Manual profiles.
Similar features are also available by right clicking on a profile name:
• New - Create a new profile.
7 - 2
(page 7-4)
(page 7-27)
The radio has been turned off.
• Tap the radio off icon to turn the radio on.
• When the status of the radio is changing a message may be displayed
The radio is on but is not connected:
• If there are one or more auto profiles, none of them are able to connect.
• If there are one or more manual profiles, none of them have been
The radio has successfully connected to the network:
• If security is enabled, the authentication process has been completed.
• The SSID of the network is displayed below the access point icon.
such as "Radio has been turned on".
activated.