Mixer - Honeywell Thor vm3 User Manual

Mixer

Start > Settings > Control Panel > Mixer
The Thor VM3 has two speakers (located at the bottom front of the unit) and one microphone (located at the top front of the
unit).
Use the settings on these panels to adjust the master volume, record gain and sidetone.
Factory Default Settings
Output
Master Volume
Input
Record Gain
Sidetone
Output Panel
Tap and hold the Master Volume slider and move either left or right, or tap the left and right arrows, to adjust Speaker
volume decibel level.
Tap the Test button to play a sample sound at the selected volume.
Input Panel
By default the side tone is muted. If needed, the user should enable the side tone. If this causes interfering noise, the
side tone should be disabled. The VM3 audio is designed to be used with or without the side tone. This is acceptable
permissible performance for the Thor VM3.
Use the radio buttons to enable or disable the sidetone.
Tap and hold the Record Gain or Sidetone sliders and move either left or right, or tap the left and right arrows, to adjust
the levels.
5 - 38
- dB
0.0 dB
Disabled