Honeywell Thor vm3 User Manual page 54

Step 2 – Attach RAM Mount Ball to the Thor VM3 Dock
1. Turn the Thor VM3 off before attaching the RAM mount ball.
2. Place the Thor VM3 face down on a stable surface.
3. If using the external keyboard mount, position the Keyboard Bracket and the Size D RAM ball on the rear of the
Thor VM3 dock, aligning the holes on the back of the Thor VM3 dock with the holes on the bracket and the RAM
ball base.
4. If not using the external keyboard mount, position the RAM ball on the rear of the Thor VM3 dock, aligning the
holes on the back of the Thor VM3 dock with the holes on the RAM ball base. Attach with four M5 screws, flat
washers and lock washers.
5. If using the external keyboard mount, attach the Size C RAM ball to the Thor VM3 Keyboard bracket with four M5
nuts, flat washers and lock washers.
Step 3 – Attach Thor VM3 Assembly to RAM Mount
1. Slip the Size D RAM arm over the ball on the vehicle RAM mount (RAM Ball mount shown).
2. Insert the ball on the dock into the RAM arm and tighten the knob on the RAM arm using the supplied RAM
wrench.
Step 4 – Place the Thor VM3 into the Dock
If the Thor VM3 is not already mounted to the dock,
Step 5 – Attach Alphanumeric Keyboard to Mounting Plate (Optional)
Note: This step is only for a Thor VM3 with the optional external keyboard.
If using the optional integrated keyboard mount, attach the keyboard to keyboard mounting plate, using four #8 screws,
flat washers and lock washers.
Note: Excess keyboard cable length can be looped around the hooks on the bottom of the keyboard mounting plate.
4 - 10
Place Thor VM3 in the Dock (page 4-2)