Bluetooth Printing - Honeywell Thor vm3 User Manual

Bluetooth Printing

Start > Settings > Control Panel > Bluetooth Printing
To configure your computer for Bluetooth wireless printing, you need to:
• Create an application that opens the wireless printing COM port on your computer. For help, see the Bluetooth Resource
Kit, which is part of the Intermec Developer Library (IDL), available from the Intermec website at www.intermec.com/idl.
• Select the current wireless printer on your computer. For help, see the Printer Options section of
(page 5-27)
Note: You can also print wirelessly using Microsoft APIs with Bluetooth extensions for Winsock and Bluetooth. For help,
see the Bluetooth Resource Kit documentation.
The Bluetooth Printing wizard supports the following Honeywell printers:
• PR2
• PR3
• PB31
• PB21
• PB42
• PB50
To connect a printer using the search option:
1. Turn on the printer.
2. Select Bluetooth Printing from the control panel.
3. Tap Search.
Note: The printer can also be specified by taping the Manual button and entering the MAC address of the printer.
4. A list of available Bluetooth printers is displayed.
Note: By default only printers are displayed in the search results.
5. Select the desired printer from the list and tap the Set button.
6. If this is the first time a printer is connected, it may take 40-45 seconds for the driver to install.
7. If no error message is displayed, the printer is ready. If an error message is displayed, the timeout may have happened
before the driver installation has completed.
5 - 18
Enterprise Settings