Epson RC180 Manual page 221

No. Message
Network communication port number
3259
was not specified.
3260 Language ID was not specified.
3261 Expected '.'.
Vision Sequence Name was not
3262
specified.
Vision Sequence Name or Calibration
3263
Name was not specified.
Vision Property Name or Result Name
3264
was not specified.
Vision Property Name, Result Name
3265
or Object Name was not specified.
Vision Calibration Property Name was
3266
not specified.
3267 Task type was not specified.
3268 Form name was not specified.
Property Name or Control Name was
3269
not specified.
3270 Property Name was not specified.
3271 BackColorMode was not specified.
3272 BorderStyle was not specified.
RC180 Rev.17
Remedy
Network communication port number is
not specified in ChkNet function. Refer
to SPEL+ Language Reference "ChkNet
Function" and specify a proper port
number.
Language ID is not
ErrMsg$ function. Refer to SPEL+
Language
"ErrMsg$ Function" and specify a
proper language ID.
Add '.'.
Vision sequence name is not specified in
Vision Guide commands such as VSet,
VGet, and VRun. Add a sequence
name.
Vision sequence name or calibration
name is not specified in VSet and VGet
statements. Add a sequence name or
calibration name.
Vision property name or result name is
not specified in VSet
statements. Add a property name or
result name.
Either of Vision property name, result
name, or object name is not specified in
VSet and VGet statements. Add either
of a property name, result name, or
object name.
Vision calibration property name is not
specified in VSet and VGet statements.
Add a property name.
Task type is not specified in Xqt
statement. Refer to SPEL+ Language
Reference "Xqt Statement" and specify a
proper task type.
Form name is not specified in GSet,
GGet, GShow, GShowDialog,
GClose statements. Specify a form
name.
Property name or control name is not
specified in GSet and GGet statements.
Specify a property name or control name.
Property name is not specified in GSet
and GGet statements.
property name.
BackColorMode property setting value is
not specified in GSet statement. Refer
to GUI Builder 5.0
"BackColorMode Property" and specify
a proper setting value.
BorderStyle property setting value is not
specified in GSet statement.
GUI Builder 5.0 manual "BorderStyle
Property" and specify a proper setting
value.
Maintenance 8. Trouble Shooting
Note 1
specified in
Reference
and VGet
and
Specify a
manual
Refer to
Note 2
209