Epson RC180 Manual page 193

Simulator
No. Message
Initialization
1861
initialize SimulatorMNG.
Initialization
1862
initialize WBProxy.
1863 The parameter is invalid.
Initialization failure. Virtual controller
1864
does not exist.
Initialization failure. Failed to start
1865
virtual controller.
Cannot execute because it is not dry
1867
run mode.
Initialization failure. Directory cannot
1868
be found.
Pallet failure. Number of point is
1870
beyond the maximum value.
Connection failure. Virtual controller
1871
version is old.
Connection failure. Files for simulator
1872 that used real controller cannot be
found.
Connection failure. Files for simulator
1873 that used virtual controller cannot be
found.
1874 Virtual Controller cannot be added.
Simulator Object
1875
register data of the simulator object.
Simulator Object
1876
register data of the simulator object.
Simulator Object
1877
remove data of the simulator object.
Simulator Object
1878
update data of the simulator object.
1879 Other virtual controllers are starting.
1880 Cannot execute during controller reset.
RC180 Rev.17
1. Reboot the EPSON RC+ 5.0.
failure. Failed to
2. Reboot the PC.
3. Reinstall the EPSON RC+ 5.0.
1. Reboot the EPSON RC+ 5.0.
failure. Failed to
2. Reboot the PC.
3. Reinstall the EPSON RC+ 5.0.
Installation of EPSON RC+ 5.0 failed.
Reinstall EPSON RC+ 5.0.
1. Retry after a while.
2. Reboot the PC.
Dry run mode is invalid.
Enable the dry run.
Installation of the EPSON RC+ 5.0
failed. Reinstall the software.
Register the virtual controller again in
the connection setting.
Installation of EPSON RC+ 5.0 failed.
Reinstall the software.
failure. Cannot
failure. Cannot
failure. Cannot
failure. Cannot
Start another EPSON RC+5.0 and check
if it connects with the virtual controller.
Maintenance 8. Trouble Shooting
Remedy Note 1 Note 2
181