Epson RC180 Manual page 118

Setup & Operation 12. Option Units
(6) Set the [MAC Address] according to the PROFINET IO controller that uses the DAP
NOTE

(7) When the configuration is completed, click the <Apply> button and apply the
(8) Click the <Close> button.
Operation
For details, refer to 12.3.9 Operation.
Electronic Information File (GSDML file)
A GSDML file is supplied for PROFINET network configuration. The file is located in
the following folder in the Manual Update CD that is attached to the Robot Controller.
106
mode.
Usually, select DAP Ver.2. DAP Ver.1 is available for the obsolete PROFINET IO
controller.
The PROFINET option does not have the alert function that is an optional function in
DAP Ver.2.
settings.
\EpsonRC50\Fieldbus\PROFINET
RC180 Rev.17