HP Designjet 3D Service Manual page 382

22. Measure and record the distance from the outside edge of circle H to the
23. Measure and record the diameter of circle H along the center line
24. Add the lengths derived from steps 22 and 23 (G-H and H-I) and then
25. Measure and record the distance from the outside edge of circle C to the
-366
outside edge of circle I. See
Figure 366: Measuring distances from outside edges of H and I
between G and I. See Figure 386
Figure 367: Measuring diameter of circle H
subtract the width of circle H derived from step 24. Record this total as
"GRear"
outside edge of circle E. See
Figure 385
Figure 387