Motor; Removing The X Motor - HP Designjet 3D Service Manual

X Motor
Required Tools
Hardware

Removing the X motor

1. Remove the top panel. See
2. Remove the side panels. See
3. Using a
-252
5
• ⁄ " nut driver or standard screwdriver.
16
1
• ⁄ " box wrench.
2
3
• ⁄ " allen wrench.
32
1
• ⁄ " allen wrench.
8
• Cutters.
• Wire tie
3
• 10-32 x ⁄ " slotted screws (x16)
8
1
• 10-32 x ⁄ " slotted screws (x4)
2
1
• 8-32 x ⁄ " socket head cap screws (x4)
2
5
⁄ " nut driver or standard screwdriver, remove the 7 left side
16
access panel mounting screws and remove the left side access panel.
See Figure 200.
"Removing the top panel" on page 161
"Removing the side panels" on page 162