Installing The Top Panel; Side Panels; Removing The Side Panels - HP Designjet 3D Service Manual

Installing the top panel

1. Slide the top panel towards the front and in to place, then push down.
2. Using a

Side Panels

Required Tools
Hardware

Removing the side panels

1. Remove the top panel. See
2. Using a
-162
Figure 64: Top panel removal
Slide top panel toward the back of
the printer and lift up to remove.
5
⁄ " nut driver or standard screwdriver, reinstall the 3 mounting
16
screws.
5
• ⁄ " nut driver or standard screwdriver.
16
1
• 10-32 x ⁄ " slotted screws (x6)
2
Removing the left side panel:
5
⁄ " nut driver or standard screwdriver, remove the 3 mounting
16
screws. See Figure 65.
"Removing the top panel" on page 161