Y Motor Belt; Removing The Y Motor Belt - HP Designjet 3D Service Manual

Y Motor Belt

Required Tools
5
• ⁄ " nut driver or standard screwdriver.
16
• Dial indicator and belt tension gauge assembly
Hardware
3
• 10-32 x ⁄ " slotted screws (x30)
8
• 3- 1 6 x 1" fender washer

Removing the Y Motor Belt

1. Remove the top panel. See
2. Remove the side panels. See
3. Remove the upper electronics bay cover. See
tronics bay cover" on page 173
4. Remove the left side access panel. See
"Removing the top panel" on page 161
"Removing the side panels" on page 162
"Removing the upper elec-
Figure 217.
-263