HP Designjet 3D Service Manual page 258

Remove the 7
mounting screws.
5. Using a
6. Disconnect the umbilical hose from the head cooling fan and remove the
Loosen the clamp screw
and disconnect the
hose
7. Remove the head cover by pressing the tabs in and pulling outward. See
-242
Figure 185: Right side access cover mounting screw locations
1
⁄ " nut driver or standard screwdriver, loosen the umbilical
4
hose clamp. See Figure 186.
hose clamp. See Figure 186.
Figure 186: Umbilical hose clamp location
Figure 187.