Siemens SINAMICS G150 Operating Instructions Manual page 467

Function diagram
FP 2701
Parameter
• r0056.4
• r0060
• r0063[0...2]
• r0108.14
• p0855[C]
• p0856
• p0858
• r0899.12
• r0899.13
• p1215
• p1216
• p1217
• p1226
• p1227
• p1228
• p1278
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
Simple brake control (r0108.14 = 0)
Magnetizing completed
CO: Speed setpoint before the setpoint filter
CO: Speed actual value
Extended brake control
BI: Unconditionally release holding brake
BI: Speed controller enabled
BI: Unconditionally apply holding brake
BO: Holding brake open
BO: Command, close holding brake
Motor holding brake configuration
Motor holding brake release time
Motor holding brake closing time
Threshold for standstill detection
Standstill detection monitoring time
Pulse suppression delay time
Brake control diagnostic evaluation
Functions, Monitoring, and Protective Functions
9.2 Drive Functions
465