Siemens SINAMICS G150 Operating Instructions Manual page 240

Commissioning
5.3 Procedure for commissioning via STARTER
Parameter
Parameters can also be used to modify and/or display the properties of the Ethernet
interface.
• p8900
• p8901
• p8902
• p8903
• p8904
• p8905
• r8910
• r8911
• r8912
• r8913
• r8914
• r8915
238
IE name of the station
IE IP address of the station
IE default gateway of station
IE subnet mask of station
IE DHCP mode
IE interface configuration
IE name of station active
IE IP address of station active
IE default gateway of station active
IE subnet mask of station active
IE DHCP mode of station active
IE MAC address of station
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A