Siemens SINAMICS G150 Operating Instructions Manual page 276

Operation
6.3 Basic information about the drive system
Fixed values for interconnection using BICO technology
The following connector outputs are available for interconnecting any fixed value settings:
• p2900[0...n]
• p2901[0...n]
• p2930[0...n]
Example:
These parameters can be used to interconnect the scaling factor for the main setpoint or to
interconnect an additional torque.
274
CO: Fixed value_%_1
CO: Fixed value_%_2
CO: Fixed Value_M_1
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A