Siemens SINAMICS G150 Operating Instructions Manual page 440

Converter cabinet units 75 kw to 1500 kw

Hide thumbs Also See for SINAMICS G150:

Table of Contents

Functions, Monitoring, and Protective Functions

9.2 Drive Functions

Faults without automatic restart (p1206)

Up to 10 fault numbers for which the automatic restart should not be effective can be

selected via p1206[0...9].

The parameter is only effective if p1210 = 6 and p1210 = 16.

• p1206[0...9]

To prevent the motor from switching to phase opposition when the drive is being restarted,

there is a delay while the motor demagnetizes (t = 2.3 x motor magnetization time constant).

Once this time has elapsed, the inverter is enabled and the motor is supplied with power.

Faults without automatic restart

Automatic restart mode

Automatic restart, start attempts

Automatic restart, delay time start attempts

Automatic restart monitoring time

Automatic restart status

Converter cabinet units

Operating Instructions, 03/2012, A5E03263466A