Commissioning
5.3 Procedure for commissioning via STARTER
Configuring the drive unit
Figure 5-13
⇒ Under Connection voltage, choose the correct voltage. Under Cooling method: choose the
correct cooling method for your drive unit.
Note
In this step, you make a preliminary selection of the cabinet units. You do not define the line
voltage and cooling method yet.
⇒ A list is now displayed under Drive unit selection:. Choose the corresponding drive unit
according to type (order no.) (see type plate).
⇒ Click Continue >
212
Configuring the drive unit
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A