Installing The Smart Client - JVC VR-X3200U Instructions Manual

<Viewer Part> Basics
Installing the Viewer on a
Computer (continued)

Installing the Smart Client

Caution:
● Before installing, check to ensure that Microsoft.NET
Framework 4.0, DirectX 9.0 or later versions, and
Microsoft Internet Explorer 6.0 or later versions are
already installed on the computer. If any of these are not
installed, installation of the Smart Client may fail.
1
Open the Internet Explorer browser (6.0 or later
versions), and enter the IP address of NVR as
Ahttp://192.168.1.253B
A welcome page will appear.
NVR Viewer
NVR Viewer
Caution:
● Do not select [Remote Client].
2
Click [(Smart Client Installer) English]
The [Do you want to run or save this files?] confirmation
message appears.
3
Click [Run].
NVR Viewer.exe
Confirmation message appears, asking "Do you want to
run this software?".
136
4
Click [Run].
NVR Viewer Installer
Doing so starts up the Smart Client Setup Wizard.
NVR_Viewer [1].exe
5
Click [Next] and follow the installation
instructions