JVC VR-X3200U Instructions Manual page 53

The [Generic Event Properties] window appears.
4
Click [Add]
The setting screen appears.
5
Specify the event name and contents
Item
Event For specifying an expression as a key word
substring for analysis of received character strings.
Click [Add] to add the expression you
entered to [Event message expression].
Event The added expression is displayed.
message Furthermore, the following conditions are
expression edited.
() For putting related expressions as a single
entity. Expressions put in parenthesis are
processed in priority to other expressions.
AND Add this between expressions that must be
included.
OR Add this between expressions either of
which must be included.
Remove For deleting expression to the left of the cursor.
Event Select which protocol this unit uses to
protocol receive on the detection of an event.
● Any: Both TCP and UDP data are
received and analysed.
● TCP: Only TCP data is received and
analysed.
● UDP: Only UDP data is received and
analysed.
Event rule Set the rule for analysing the received data.
● Match: Only data which exactly matches
type
the message set in AEvent message
expressionB is analysed.
● Search: Data which includes the
message set in AEvent message
expressionB is analysed.
Event Each event is prioritized from A0B (lowest) to
priority A1000B (highest) to determine which event
will function when the received data
complies with more than on event rule.
Note:
● The event name must be unique.
● The following characters cannot be used as part of the
event name and character strings.
|
< > & ' " \ / : * ? [ ]
Description
47