Table of Contents
Advertisement
Action Setup—Starting Recording
Recording is started upon the occurrence of any event.
Note:
● You can perform the same settings below by opening the
properties of each camera from [Hardware device] in
[Advanced Configuration]. (A Page 93 "Recording
Properties")
1
Click [+] in [Advanced Configuration]
2
Double-click [Cameras and Storage Information]
The [Recording and Storage Properties] window appears.
3
Select [Video Recording]
4
Select an event that starts recording
Item
Always
For recording images always.
(Recording is not triggered by an event.)
Motion
For starting recording by motion detection.
Detection
Event
For starting recording by any event other than
motion detection.
Event and
For starting recording upon the occurrence of
motion
an event including motion detection.
detection
● Select the [Apply Template] check box and click [Apply]
to apply the settings selected in [Template - >] in the
upper part to all selected cameras.
Description
55
Advertisement
Table of Contents
