Table of Contents
Advertisement
Checking Version
Information
1
Click [
(About)]
The version information is displayed.
2
Click [OK] to close the window
Setting the Matrix Display
Area
Set the display position, image quality, etc. of the distributed
live video using the Matrix function.
Note:
● Matrix is a function to distribute images from the recorder
to display them on the viewer (Smart Client) installed on
any computer on the network. Settings for Matrix are
mainly made on the recorder. When an event occurs or
motion is detected, or important live images are to be
shared with another user, etc., live images are
automatically displayed on the specified computer.
1
Click the [Setup] tab
2
Drag [Matrix] in the [System Overview] section
into the view
3
Release the mouse button at a preferred position
A thin blue frame is displayed.
4
Make the image settings in the [Properties] section
● Image quality
Item
Full
Super high (for megapixel) 640 pixels (VGA)
High
Medium
Low
● Frame rate
Item
Frame rate by formats
JPEG
Unlimited
For transmitting all frames.
(default)
Medium
For transmitting
1 frame for every
4 frames.
Low
For transmitting
1 frame for every
20 frames.
● Maintain image aspect ratio: Select this check box to
maintain camera image aspect ratio. Deselect this check
box to reduce images according to the Matrix position.
5
Click [Connection Settings...] and set a TCP port
and a password
● Enter the TCP port and password set in Matrix of
Management Application. (A Page 53 "Action Setup—
Distributing Camera Images (Matrix)")
Note:
● Multiple Matrix positions can be set in the view. In such a
case, set the window ranking order in [Window index] in
the [Properties] section. The most recently distributed
camera image will always be displayed in the Matrix 1
position.
Description
The same image quality as
the original images (default)
320 pixels (QVGA)
200 pixels
160 pixels
MPEG
MPEG
(I frame)
(P frame)
For transmitting all frames.
For
No
transmitting
transmission.
all frames.
177
Advertisement
Table of Contents
